• The amplitude curve of ultrasonic drilling machine

    The amplitude curve of ultrasonic drilling machine2020-11-27 10:55:23

      The vibration amplitude curve is shown in the following figure. There is no vibration at node, but the largest stress appears at these points. The machining efficiency is determined by the foll...

  • Solder a drilling tool onto the horn

    Solder a drilling tool onto the horn2020-11-27 10:54:06

      Solder a drilling tool onto the horn   1. Apply a little flux and silver solder onto the end of the drilling tool. 2. Put the drilling tool into position on the horn, and add flux to the j...

  • Principle of ultrasonic machining

    Principle of ultrasonic machining2020-11-27 10:52:49

      Definition: Ultrasonic Machining is a non-traditional process, in which abrasives contained in a slurry are driven against the work by a tool oscillating at low amplitude (25-100 microns) and h...

  • Possibility of ultrasonic machining

    Possibility of ultrasonic machining2020-11-27 10:51:41

      Process capability 1. Can Machine work piece harder than 40 HRC to 60 HRC like carbides, ceramics, tungsten glass that cannot be machined by conventional methods 2. Tolerance range 7 micron to ...

  • Mounting the horn of ultrasonic Driller

    Mounting the horn of ultrasonic Driller2020-11-27 10:50:23

      Tighten the set-screw in the cone. Clean the contact surface on both sides, transducer-cone and horn. Apply a drop of machine oil on both sides. Screw the horn onto the transducer-cone and tigh...

  • Components of Ultrasonic Milling System

    Components of Ultrasonic Milling System2020-11-27 10:48:48

      High power sine wave generator This unit converts low frequency (60 Hz) electrical power to high frequency (20kHz) electrical power.   Transducer The high frequency electrical signal is tr...

  • Why is it said that micro ultrasonic processing is the nemesis of hard and brittle materials

    Why is it said that micro ultrasonic processing is the nemesis of hard and brittle materials2020-11-20 09:28:18

      Ultrasonic machining is a machining method developed in recent decades, which makes up for the shortcomings of EDM and electrochemical machining. EDM and electrochemical machining generally can...

  • What is ultrasonic machining?

    What is ultrasonic machining?2020-11-20 09:23:17

      Principle Acoustic waves with a frequency exceeding 16000 Hz are called ultrasonic waves. Ultrasonic processing is a processing method that uses tools to vibrate at ultrasonic frequency and imp...

  • Ultrasonic Cutting Knife Technology And Application Fields

    Ultrasonic Cutting Knife Technology And Application Fields2020-11-19 13:59:59

      Different ultrasonic cutting processes The main role of the ultrasonic cutting process is to separate the connected components. The high frequency vibration per second can reduce the pressure o...

  • Introduction for Ultrasonic Cutting

    Introduction for Ultrasonic Cutting2020-11-19 13:57:18

      Ultrasonic cutting uses ultrasonic energy to cut objects.   An electric pulse is sent through the cutter, creating microscopic vibrations in the blade. These vibrations are so small they c...

Total 236 registros Primero [1] 2 3 4 5 6 7 8 9 10 Next >> Duran